The Panasonic SC-GA10 has what is arguably the most desirable looks of all the Google Assistant speakers. A tall tower in polished back or white. Oh, and a stereo pairing is coming via firmware update soon.
GadgetGuy Thomas Bartlett reviewed the speaker in April stating it had loud sound and pleasant styling. We won’t repeat Thomas’s excellent review here. Perhaps read it first before continuing here.
PS – Unlike Thomas’s experience with Google Home app setup we had no issues at all.
We are reviewing ten Google Assistant speakers.
While this article is not a shoot-out as such, it does show that there are distinct Google Assistant categories of speakers.
Basic 1.0, 24-bit/96kHz – Google Home and Google Home Mini (review here)
Mid 1.0 – Sony LF-S50G (original review here and update to come)
Water resistant/portable – JBL Link 10/20/300 (reviews to come)
Stereo – Google Home Max (review here) and Panasonic SC-GA10 (original review here and this updated review)
Review Update: Panasonic SC-GA10 speaker
We asked Panasonic for a pair of these to test in stereo. Alas, the firmware update mentioned at launch in April has not occurred. So, when it does, we will try for stereo again.
But we probably would repeat the caveat that we did with the Google Home Max. Is it better to have two of these for 2.0 at $758 or buy a decent 3.1 sound bar and a Google Home Mini for about the same price?
The answer comes in two ways. First what fits your décor. Second, if you find the Panasonic sound signature appealing in your environment.
Let’s look at the impressive tech specs first
24-bit/192kHz sound (Hi-Res audio)
Bluetooth 4.2 SBC (standard) and AAC (high-res)codecs
Mono 1.0 forward firing
1 x 80mm dual coil (that is like two speakers in one) for bass and mids
Bass reflex port to pump some more air
2 x 20mm tweeters angled at 45°
40W, 1kHz/10% THD (2 x 20W)
Wi-Fi N dual band
Chromecast and multi-room audio
So how does it sound?
The Hi-Res works only via Hi-Res enabled Bluetooth smartphones (like the excellent LG V30+ ThinQ). While welcome it is probably overkill for a mono 1.0, front firing speaker. Bring on that stereo firmware update!
In our tests, we found upper bass kicking in at 100H-500Hz. It also had reasonably respectable mids until 2kHz, but it was all downhill from there.
At full volume (80dB) upper treble was harsh and total harmonic distortion unacceptable. Note that this test was with a tone generator and they don’t lie.
But how many listen at full volume? Well probably very few. Up to 80% volume the music experience was pleasant.
So, the native sound is a mid-sound signature for clear voice. As such you don’t get room-thumping bass (no ‘portable’ speaker does – Google Home Max comes closest). Nor do you get the very high crisp notes.
This does deserve further investigation for two reasons. First, it’s a Panasonic, and they don’t make too many mistakes. Second, it is a 24-bit/192kHZ Hi-Res device.
Well, we did investigate
We had not installed the Panasonic Music Control App (for Android and iOS). The first thing it did was update firmware.
The app is for use outside the Google Home environment. It manages things like
Hooking up to a DLNA server (NAS storage), phone, tablet or PC.
An Equaliser (with the settings stored on the speaker)
Choice of streaming music providers (outside those from Google Home)
Stereo pairing (when available although Google Home also handles this)
And joining a Panasonic based multi-room setup.
The app has Super Sound EQ, Super Bass Sound (does ramp up midbass) and presets.